Kubota ARN222-GDXW (25059)

Kubota Combine ARN222-GDXW Body number: 10928 Hour meter 225 hours only (aircraft size) Overall length: 3300mm Overall width: 1660mm Overall height: 1940mm Weight: Approximately 1200kg (engine Information) *2 row mowing *22 horsepower 3 cylinder diesel *hour meter 225 hours *590L gran tank *Foldable auger *Travel: Hydraulic motor type HST continuously variable transmission *Automatic rowing depth control *Reaping autoclutch *Reaping slide (electric) *Unloader automatic swivel device *Intensive lubrication *Reaping speed changeover *Minutes Grass can open *Dropper, cutter switch *Equipped with divider*Gom crawler Size: 330-3 7-90 (Maintenance details) * Engine oil replacement * Engine oil filter replacement * Coolant liquid LLC replacement * Transmission Oil exchange*Mission oil filter exchange*Concentration Lubricating oil replacement *Battery replacement (a new one will be installed after the sale) *Fuel element replacement *Fuel filter ASSY replacement *Air cleaner Replacing notes * Replacing fan belt * Replacing all 6 cutting blades * Replacing trigger rubber plate * Engine room protection Sponge replacement * Radiator protection sponge replacement * Deteriorated V-belt replacement below SA-37 reaping drive belt SA-47 Greta Cutter drive belt SB-45 Travel drive belt SB-47 Cutter drive belt SB-120 (No. 1. No. 2. (Feed chain drive belt) SC-50 sawing barrel drive belt * Swinging plate removed and cleaned Internally cleaned * Rubber crawler removed and cleaned Tension adjustment and assembly * Lower part, sawing barrel rust-preventing paint finish * Rolling wheels Inspection (greased up) *Mowing Teeth: Adjusted gap for attachment/detachment *Chain and tension of each part *Operation of each part confirmed (others) *Gom crawler: As you can see in the image, it has some ridges and is in good condition. There are some wrinkles, etc., but it can still be used. * Batt Lee :Please rest assured that we will replace it with a new one after the sale. *Engine: It starts on the first try and is in great condition. Stable from idling to high speed range. *Wara cutting blades: All 6 pieces are provided by our company. Please rest assured that we have replaced it with a new one. *Saw blade: As shown in the image, there is little wear and it is still usable. *Cutter blade: It is in good condition with little wear. Disassembled and the overhole gap has been adjusted. Still usable. *Cutter blade: There is little loss and it can still be used. *Threshing and reaping operation: Operation has been confirmed with idle running. Everything is in good condition. *Exterior: As shown in the image, this is a very beautiful product. The inside of the engine room is also clean. Since it is a used car. Please note that there may be some dirt, scratches, rust, etc. *Please feel free to contact us for confirmation of the actual vehicle, land transportation estimate, etc.If the timing is right, we may be able to deliver it cheaply by consolidated delivery, so please feel free to contact us. Please contact us. *If the customer picks up the item or if the item can be delivered by our company's own delivery service (to a nearby prefecture), cash exchange is also possible. Otherwise, please use bank transfer. *If you have any questions, please contact us. Please feel free to contact the person in charge via mobile phone.We have many detailed images posted on our homepage, so please check them out.