Mitsubishi VY446 (6621)


価格:
販売価格¥1,641,040
在庫:
在庫あり
Control No. 6621
Machine Type Combine Harvesters
Last Updated(JST) 2021-11-08T15:52:04+00:00
New/Used New
Manufacturer Mitsubishi
Model VY446
Horse Power 46
Year
Hour Meter 501
Drive Type
Fuel Type Diesel
Size(L × W × H)
Weight
Maintenance Maintenance Required

説明

"New Year holiday notice

We will leave the following schedule for the New Year holidays.
We apologize for any inconvenience, but thank you for your consideration.


New Year holidays: From December 29, 202 (Wed) to January 5, 2022 (Wed)

※ We will respond sequentially from January 6 (Thursday) January 6, 202, 2022 for inquiries during the closing period.

[Capital information]
▼ Body
Manufacturer: Mitsubishi
Model: VY446
Number of harvestors 4
Horce: 46 (PS)
Hour: 501 (H)
※ As there are movements in the warehouse, etc., please acknowledge some errors.

Crawler Width 43 (mm)

▼ Status / Storage Location
Status: Steady state:
Management base: Miyagi Prefecture Kurihara City 1st yard
Management number: 1900

[Equipment without]
No cabin
No canopy (hood)
No knot
Auxiliary Devida (OK, Swiss, etc.)
Automatic horizontal control (left and right)
Automatic horizontal control (front and rear)

[Please confirm the following]
○ Engine start-up
○ Operation confirmation ※ Continuous use in actual work is not performed.
○ There is no accessories
○ We are careful about inspection etc., but it will be handed over at the present situation. Please consider the following and look at the result of inspection.

[Exterior part inspection]
Type nameplate seal damaged almost no
Model seal (left, right) Corruption almost no
Sheet damage
Devider tip-breaking almost no
Devider Side Cover Corrupt
Tank part concave damage
Threshing Cover Device Deviationless
Cutter cover (rear) no broken break
Side mirror (left / right) No damage
Non-cabin roof

【Example of inspection】 ※ Only confirmation item only

Engine oil [2. dirt]
Air Cleaner Element [9. Dirty]
Automatic lubricating switch [90 reaction]

【Remarks】
"※ Tank club Connorcover and lower cover damage
※ Rear shot corruption
※ The contact of the main shift lever is poor and there is a time when the engine starts at the neutral position (the main shift lever is moving several times) "

[Results] All items
The following is the entire item of inspection results of this machine.
Engine oil [1.%] or higher
Engine oil [2. dirt]
Radiator [3. Amount] Normal
Radiator [4. Color] normal
Radiator [5. Water leak]
Reserve Tank [6. Damage / Stockless] None
Fanbert [7. Stockless] None
Air Conditioner Belt [8. Stock] Non-loaded
Air Cleaner Element [9. Dirty]
Air Cleaner Element [10 Damage / Stockless] None
Engine start [11 operation]
Battery [12 operation] Almost normal
Exhaust [13 smoke] normal
Mowring up [14 rising / falling]
Advanced / reverse (driving) [15 operation]
Advance and reverse (work) [16 operation]
Advance and reverse (falling) [17 operation]
Normally pivot [18 operation (right)]
Normal turn [19 operation (left)]
Brake pivot [20 operation (right)]
Brake pivot [21 operation (left)]
Spin turn [22 operation (right)]
Spin turn [23 operation (left)]
Cive turning [24 operation (right)] non-loaded
Deurization [25 operation (left)] not installed
Drive sprocket [26 oil leak (right)]
Drive sprocket [27 oil leak (left)] without
Crawler [28 large cracks (right) (looking from outside)] almost no
Crawler [29 big cracks (left) (from outside)] almost no
Brox (upper) [30 fixing (right)]
Ring (upper) [31 sticking (left)] None
Ring (bottom) [32 fixing (right)]
Ring (bottom) [33 sticking (left)] None
Movable roller [34 fixing (right)]
Movable roller [35 fixing (left)]
None None [36 shortages / defect]
No blade [37 shortages, defect]
こ 回 回 回 3 動 作 る
Feed chain [39 operation]
Toumi [40 operation]
Swing flow board [41 operation]
Waraka Chain [42 Operation]
Waratain (nail) [43 shortages and defect]
Waratain (nail) [44 operation]
Cutter blade (cutting) [45 shortages / defect]
Cutter blade (feed) [46 shortages / deficiency]
Cutter Blade (Cutting) [47 Operation]
Cutter blade (feed) [48 operation]
No. 49 [49]
2nd Lacen (horizontal) [50 operation]
No. 1 Lacen (Vertical) [51 Operation]
2nd Lacen (vertical) [52 operation]
Oruger Release Operation (Manual) [53 Lift]
Oruger Runction (Manual) [54 Right Turning]
Oruger Runction (Manual) [55 Left Pivoting] Non-loaded
Oruger teeth operation (manual) [56 down]
Authority operation (automatic) [57 automatic turning (right)] not installed
Authorion operation (automatic) [58 automatic swivel (left)] not installed
Oruger Runction (Automatic) [59 Automatic Swirl (After)]
Orhalonation operation (automatic) [60 automatic storage]
Auger OP (zoom swing shutter etc.) [61 operation] not installed
Emission racemic operation [62 operation]
None
Mowet [64 operation]
Caused nails [65 shortages / deficit]
Cause nails [66]
Auxiliary Divider Nail [67 Stock Loss] None
Auxiliary Device Nail [68 Operation]
Belt with protrusion [69 missing / deficit]
Belt with protrusion [70 operation]
Star Wheel [71 missing / deficit]
Star Wheel [72]
Corporate Corporation [73 Operation]
Kakikami (nail) [74 shortages, defect]
Kakikami (nail) [75 operation]
Header transfer (nail) [76 shortages / deficiency]
Header transfer (nail) [77 operation]
Big depth chain [78 operation]
Koi depth (manual) [79 operation]
こ (automatic) [80 lamp lighting]
When cutting and shift switching (standard) [81 operation] non-loaded
When cutting and shift switching (high speed) [82 operation] not installed
Change shift switching (low speed) [83 operation] not installed
Left and right horizontal control (manual) [84 operation]
Left and right horizontal control (automatic) [85 operation]
Before and forth horizontal control (manual) [86 operation] not installed
Horizontal control (automatic) [87 lamp lighting] not installed
Select automatic lamp [88 lights]
Auto Clutch Lamp [89 Lights] Non-loaded
Automatic lubricating switch [90 reaction]
Emergency stop switch [91 operation]
Radio [92 operation] not installed
Panel operation (confirmation of rotation only) [93 operation]
Light [94 lighting (right)]
Light [95 lit (left)] not installed
Winker (previous) [96 flashing (right)]
Winker (previous) [97 flashing (left)]
Winker (after) [98 flashing (right)]
Winker (after) [99 flashing (left)]
Horn [100 sounds]
Air conditioner [101 cooling] not installed
Air conditioner [102 air volume change] not installed
Work etc. [103]

【Notes】
· We do not check other than inspection items, please check with photos etc.
· Belt-related wear condition is not checked.
· Wear of Racen is not checked.
· We do not check chain and consumables.
· We do not check wear of the rolling rolling roll.
· The crawler check is simple, but it is not checked to the detailed part.
· Horizontal automatic checks the lighting of the lamp, etc., but it is not checked until operation.
· Automatic depth Automatic automatically checks the lighting of the lamp, but it does not check until operation.

You may also like

Recently viewed