Kubota ER467 (6231)


価格:
販売価格¥2,036,386
在庫:
在庫あり
Control No. 6231
Machine Type Combine Harvesters
Last Updated(JST) 2021-07-27T16:45:44+00:00
New/Used New
Manufacturer Kubota
Model ER467
Horse Power 67
Year
Hour Meter 752
Drive Type
Fuel Type Diesel
Size(L × W × H)
Weight
Maintenance Maintenance Required

説明

[Capital information]
▼ Body
Manufacturer: Kubota
Model: ER467
Number of harvestors 4
Horce: 67 (PS)
Hour: 752 (H)
※ As there are movements in the warehouse, etc., please acknowledge some errors.

Crawler width (mm)

▼ Status / Storage Location
Status: Steady state:
Management base: Hyogo Prefecture Kishinetsu City 1 yard
Management number: 1710

[Equipment without]
No cabin
Canopy (hood)
No knot
Auxiliary Devida (OK, Swiss, etc.)
Automatic horizontal control (left and right)
Automatic horizontal control (front and rear)

[Please confirm the following]
○ Engine start-up
○ Operation confirmation ※ Continuous use in actual work is not performed.
○ There is no accessories
○ We are careful about inspection etc., but it will be handed over at the present situation. Please consider the following and look at the result of inspection.

[Exterior part inspection]
Type nameplate seal damaged almost no
Model seal (left, right) Corruption almost no
Sheet damage
Debader tip failure
Devider Side Cover Corrupt
Tank club breakage
Threshing cover part breakage
Cutter cover (rear) no broken break
Side mirror (left / right) No damage
No cabin roofing

【Example of inspection】 ※ Only confirmation item only

Engine oil [2. dirt]
Radiator [4. Color] Discoloration
Air Cleaner Element [9. Dirty]
Battery [12 Operation] Weak (Change)
Crawler [28 large cracks (right) (looking from outside)]
Crawler [29 large cracks (left) (looking from outside)]
Calculation blade [64 operation]
Do not cause nails [66 operation]
Auxiliary Devider Nail [68 Operation]
Projection belt [70 operation]
Star Wheel [72 Operation]
Corporate chain [73 operation]
Kakikami (nail) [74 shortages, defect]
Kakikami (nail) [75 operation]
Header transfer (nail) [76 shortages / deficiency]
Header transfer (nail) [77 operation]
Koi depth chain [78 operation]
When cutting and shift switching (standard) [81 operation]
When cutting and shift switching (high speed) [82 operation]
When cutting and shift switching (low speed) [83 operation]
Winker (previous) [97 flashing (left)]
Horn [100 sounds]

【Remarks】
"※ Many rust overall
※ Career: No operation
※ Sheet adjustment lever: corruption
※ Cylinder: rust

[Results] All items
The following is the entire item of inspection results of this machine.
Engine oil [1.] gauge or more ※ normal
Engine oil [2. dirt]
Radiator [3. Amount] Normal
Radiator [4. Color] Discoloration
Radiator [5. Water leak]
Reserve Tank [6. Damage / Stockless] None
Fanbert [7. Stockless] None
Air Conditioner Belt [8. Stock] Non-loaded
Air Cleaner Element [9. Dirty]
Air Cleaner Element [10 Damage / Stockless] None
Engine start [11 operation]
Battery [12 Operation] Weak (Change)
Exhaust [13 smoke] normal
Mowring up [14 rising / falling]
Advanced / reverse (driving) [15 operation]
Advance and reverse (work) [16 operation]
Advance and reverse (falling) [17 operation]
Normally pivot [18 operation (right)]
Normal turn [19 operation (left)]
Brake pivot [20 operation (right)]
Brake pivot [21 operation (left)]
Spin turn [22 operation (right)]
Spin turn [23 operation (left)]
Cive turning [24 operation (right)]
Deurization [25 operation (left)]
Drive sprocket [26 oil leak (right)]
Drive sprocket [27 oil leak (left)] without
Crawler [28 large cracks (right) (looking from outside)]
Crawler [29 large cracks (left) (looking from outside)]
Brox (upper) [30 fixing (right)]
Ring (upper) [31 sticking (left)] None
Ring (bottom) [32 fixing (right)]
Ring (bottom) [33 sticking (left)] None
Movable roller [34 fixing (right)]
Movable roller [35 fixing (left)]
None None [36 shortages / defect]
No blade [37 shortages, defect]
こ 回 回 回 3 動 作 る
Feed chain [39 operation]
Toumi [40 operation]
Swing flow board [41 operation]
Waraka Chain [42 Operation]
Waratain (nail) [43 shortages and defect]
Waratain (nail) [44 operation]
Cutter blade (cutting) [45 shortages / defect]
Cutter blade (feed) [46 shortages / deficiency]
Cutter Blade (Cutting) [47 Operation]
Cutter blade (feed) [48 operation]
No. 49 [49]
2nd Lacen (horizontal) [50 operation]
No. 1 Lacen (Vertical) [51 Operation]
2nd Lacen (vertical) [52 operation]
Oruger Release Operation (Manual) [53 Lift]
Oruger Runction (Manual) [54 Right Turning]
Auger Release Operation (Manual) [55 Left Pivot]
Oruger teeth operation (manual) [56 down]
Orhal-turning operation (automatic) [57 automatic turning (right)] ※ The reaction of the remote control is bad
August Release Operation (Auto) [58 Automatic Swirl (Left)] ※ The reaction of the remote control is bad
Auger Release Operation (Automatic) [59 Automatic Peeling (After)] ※ The reaction of the remote control is poor
Oruger Release Operation (Auto) [60 Automatic Storage] ※ The reaction of the remote control is poor
Auger OP (zoom swing shutter etc.) [61 operation] not installed
Emission racemic operation [62 operation]
None
Calculation blade [64 operation]
Caused nails [65 shortages / deficit]
Do not cause nails [66 operation]
Auxiliary Divider Nail [67 Stock Loss] None
Auxiliary Devider Nail [68 Operation]
Belt with protrusion [69 missing / deficit]
Projection belt [70 operation]
Star Wheel [71 missing / deficit]
Star Wheel [72 Operation]
Corporate chain [73 operation]
Kakikami (nail) [74 shortages, defect]
Kakikami (nail) [75 operation]
Header transfer (nail) [76 shortages / deficiency]
Header transfer (nail) [77 operation]
Koi depth chain [78 operation]
Koi depth (manual) [79 operation]
こ (automatic) [80 lamp lighting]
When cutting and shift switching (standard) [81 operation]
When cutting and shift switching (high speed) [82 operation]
When cutting and shift switching (low speed) [83 operation]
Left and right horizontal control (manual) [84 operation]
Left and right horizontal control (automatic) [85 operation]
Horizontal control (manual) [86 operation]
Before and forth horizontal control (automatic) [87 lamp lighting]
Select automatic lamp [88 lights]
Auto Clutch Lamp [89 Lights]
Automatic lubricating switch [90 reaction]
Emergency stop switch [91 operation]
Radio [92 operation] not installed
Panel operation (confirmation of rotation only) [93 operation]
Light [94 lighting (right)]
Light [95 lighting (left)]
Winker (previous) [96 flashing (right)]
Winker (previous) [97 flashing (left)]
Winker (after) [98 flashing (right)]
Winker (after) [99 flashing (left)]
Horn [100 sounds]
Air conditioner [101 cooling] not installed
Air conditioner [102 air volume change] not installed
Work etc. [103]

【Notes】
· We do not check other than inspection items, please check with photos etc.
· Belt-related wear condition is not checked.
· Wear of Racen is not checked.
· We do not check chain and consumables.
· We do not check wear of the rolling rolling roll.
· The crawler check is simple, but it is not checked to the detailed part.
· Horizontal automatic checks the lighting of the lamp, etc., but it is not checked until operation.
· Automatic depth Automatic automatically checks the lighting of the lamp, but it does not check until operation.

You may also like

Recently viewed