Yanmar GC80 (6604)

"New Year holiday notice

We will leave the following schedule for the New Year holidays.
We apologize for any inconvenience, but thank you for your consideration.

New Year holidays: From December 29, 202 (Wed) to January 5, 2022 (Wed)

※ We will respond sequentially from January 6 (Thursday) January 6, 202, 2022 for inquiries during the closing period.

[Capital information]
▼ Body
Manufacturer: Yanmar
Model: GC80
Number of harvestors 6
Horce: 85 (PS)
Hour: 613 (H)
※ As there are movements in the warehouse, etc., please acknowledge some errors.

Crawler Width 550 (mm)

▼ Status / Storage Location
Status: Steady state:
Management base: Miyagi Prefecture Kurihara City 1st yard
Management number: 1812

[Equipment without]
There is a cabin
No canopy (hood)
No knot
Auxiliary Devida (OK, Swiss, etc.) None
Automatic horizontal control (left and right)
Automatic horizontal control (front and rear)

[Please confirm the following]
○ Engine start-up
○ Operation confirmation ※ Continuous use in actual work is not performed.
○ There is no accessories
○ We are careful about inspection etc., but it will be handed over at the present situation. Please consider the following and look at the result of inspection.

[Exterior part inspection]
Type nameplate seal damaged almost no
Model seal (left, right) Corruption almost no
Sheet damage
Devider tip-breaking almost no
Devider Side Cover Corrupt
Tank part concave damage
Threshing Cover Device Deviationless
Cutter cover (rear) no broken break
Side mirror (left / right) No damage
No cabin roofing

【Example of inspection】 ※ Only confirmation item only

Engine oil [1.] gauge or less
Radiator [4. Color] Discoloration
Air Conditioner Belt [8. Stock] There is
Air Cleaner Element [9. Dirty]
Light [94 lighting (right)]
Light [95 lighting (left)]
Air conditioner [101 cooling]

【Notices】
※ There is a device mounting cap shortage of the covering cover

[Results] All items
The following is the entire item of inspection results of this machine.
Engine oil [1.] gauge or less
Engine oil [2. Not dirt] None (tolerance)
Radiator [3. Amount] Normal
Radiator [4. Color] Discoloration
Radiator [5. Water leak]
Reserve Tank [6. Damage / Stockless] None
Fanbert [7. Stockless] None
Air Conditioner Belt [8. Stock] There is
Air Cleaner Element [9. Dirty]
Air Cleaner Element [10 Damage / Stockless] None
Engine start [11 operation]
Battery [12 operation] Almost normal
Exhaust [13 smoke] normal
Mowring up [14 rising / falling]
Advanced / reverse (driving) [15 operation]
Advance and reverse (work) [16 operation]
Advance and reverse (falling) [17 operation]
Normally pivot [18 operation (right)]
Normal turn [19 operation (left)]
Brake pivot [20 operation (right)]
Brake pivot [21 operation (left)]
Spin turn [22 operation (right)]
Spin turn [23 operation (left)]
Cive turning [24 operation (right)]
Deurization [25 operation (left)]
Drive sprocket [26 oil leak (right)]
Drive sprocket [27 oil leak (left)] no
Crawler [28 large cracks (right) (looking from outside)] almost no ※ There is deterioration of core metal part
Crawler [29 large cracks (left) (looking from outside)] almost no ※ Core bar part deterioration
Brox (upper) [30 fixing (right)]
Ring (upper) [31 sticking (left)] None
Ring (bottom) [32 fixing (right)]
Ring (bottom) [33 sticking (left)] None
Movable roller [34 fixing (right)]
Movable roller [35 fixing (left)]
None None [36 shortages / defect]
No blade [37 shortages, defect]
こ 回 回 回 3 動 作 る
Feed chain [39 operation]
Toumi [40 operation]
Swing flow board [41 operation]
Waraka Chain [42 Operation]
Waratain (nail) [43 shortages and defect]
Waratain (nail) [44 operation]
Cutter blade (cutting) [45 shortages / defect]
Cutter blade (feed) [46 shortages / deficiency]
Cutter Blade (Cutting) [47 Operation]
Cutter blade (feed) [48 operation]
No. 49 [49]
2nd Lacen (horizontal) [50 operation]
No. 1 Lacen (Vertical) [51 Operation]
2nd Lacen (vertical) [52 operation]
Oruger Release Operation (Manual) [53 Lift]
Oruger Runction (Manual) [54 Right Turning]
Auger Release Operation (Manual) [55 Left Pivot]
Oruger teeth operation (manual) [56 down]
Authority operation (automatic) [57 automatic swivel (right)]
Operation operation (automatic) [58 automatic turning (left)]
Oruger Runction (Automatic) [59 Automatic Swirl (After)]
Orhalonation operation (automatic) [60 automatic storage]
Auger OP (zoom swing shutter etc.) [61 operation] not installed
Emission racemic operation [62 operation]
None
Mowet [64 operation]
Caused nails [65 shortages / deficit]
Cause nails [66]
Auxiliary Device Nail [67 Stock Loss] Not Mounted
Auxiliary Device Nail [68 Operation] Non-loaded
Belt with protrusion [69 missing / deficit]
Belt with protrusion [70 operation]
Star Wheel [71 missing / deficit]
Star Wheel [72]
Corporate Corporation [73 Operation]
Kakikami (nail) [74 shortages, defect]
Kakikami (nail) [75 operation]
Header transfer (nail) [76 shortages / deficiency]
Header transfer (nail) [77 operation]
Big depth chain [78 operation]
Koi depth (manual) [79 operation]
こ (automatic) [80 lamp lighting]
When cutting and shift switching (standard) [81 operation]
When cutting and shift switching (high speed) [82 operation]
When cutting and shift switching (low speed) [83 operation]
Left and right horizontal control (manual) [84 operation]
Left and right horizontal control (automatic) [85 operation]
Before and forth horizontal control (manual) [86 operation] not installed
Horizontal control (automatic) [87 lamp lighting] not installed
Sorting Automatic Lamp [88 Lights] Non-loaded "※ It can not be checked by the switch ON
※ Equipment is not equipped with no lamp
Auto Clutch Lamp [89 Lights] Non-loaded "* Equipment is not equipped with no lamp
※ Operation is OK with switch ON
Automatic lubricating switch [90 reaction]
Emergency stop switch [91 operation] not installed
Radio [92]
Panel operation (confirmation of rotation only) [93 operation]
Light [94 lighting (right)]
Light [95 lighting (left)]
Winker (previous) [96 flashing (right)]
Winker (previous) [97 flashing (left)]
Winker (after) [98 flashing (right)]
Winker (after) [99 flashing (left)]
Horn [100 sounds]
Air conditioner [101 cooling]
Air conditioner [102 air volume change]
Work etc. [103]

【Precautions】
· We do not check other than inspection items, please check with photos etc.
· Belt-related wear condition is not checked.
· Wear of Racen is not checked.
· We do not check chain and consumables.
· We do not check wear of the rolling rolling roll.
· The crawler check is simple, but it is not checked to the detailed part.
· Horizontal automatic checks the lighting of the lamp, etc., but it is not checked until operation.
· Automatic depth Automatic automatically checks the lighting of the lamp, but it does not check until operation.