Control No. | 5276 |
---|---|
Machine Type | Tractors |
Last Updated(JST) | 2020-12-24T14:50:24+00:00 |
New/Used | Used |
Manufacturer | Yanmar |
Model | AF330 |
Horse Power | 30 |
Year | |
Hour Meter | 879 |
Drive Type | |
Fuel Type | Diesel |
Size(L × W × H) | 3780 x 1760 x 1870 |
Weight | |
Maintenance | Maintained |
Description
[Capital information]
▼ Body
Manufacturer: Yanmar
Model: AF330
Horce: 30 (PS)
Hour: 879 (H)
※ As there are movements in the warehouse, etc., please acknowledge some errors.
Total length: 3780 (mm)
All widths: 1760 (mm)
Total height: 1870 (mm)
▼ Rotary
Rotary Maker: Yanmar
Rotary type: R316M
Cultivation width: 1600 (mm)
▼ Status / Storage Location
Source time status: Mainted
Management base: Kyoto Prefecture Funai-gun third yard
Management number: 1192
[Equipment without]
Cabin: None
Automatic: Yes
Powerste: Yes
Automatic horizontal control: Yes
Automatic cultivation: Yes
Double speed turn: Yes
Auto Brake Turn; None
Backup: Yes
Peeling up: Yes
Number of shift stages: Advanced 16 speed / reverse 16 speed
PTO shift stage number: normal rotation 4 steps / 1 reverse stage
Independent PTO: None
External hydraulic pressure: None
Pwallion: None
Other equipment:
[Please confirm the following]
○ Engine start-up
○ Operation confirmation ※ Continuous use in actual work is not performed.
○ There is no accessories
○ We are careful about maintenance and inspection, but it will be handed over at the present situation. Please consider the following, maintenance and inspection results.
[Maintenance contents]
"Rotary chain replacement, previous tire replacement, Rotary Cover Outsometry, Rotary Axis Oil Seal Bearing, Right Bear Oil Seal Exchange, Engine Oil Exchange, Engine Oil Element Exchange, Front Carpoint Oil Inspection, Rotary Chain Case Oil Replacement, Rotary Chain Case Oil Center Def Oil Replacement, Hydraulic Mission Oil Check, Cooling Water Check, Air Cleaner Cleaning, Pneumatic Adjustment, Tightening, Each Glisup, Each House Operating Inspection, Sensor Adjustment, Brake Adjustment, Repair Coating, Other
※ There are multiple Ekbokings that wound pebbles on the rotary cover, but there is no problem in use.
"
Maintenance parts costs: about 250800 (yen)
Maintenance time: about 14 (hours)
[After maintenance, exterior department inspection]
Type Nameplate Seal: No Damaged
Model seal (left, right): no damage
Sheet: No damage
Before Bonnet: No damage
Bonnet: No damage
Bonnet (left, right): No damage
Fender (left, right): no damage
Side mirror (left, right): No damage ※ On the right only
Previous Wheel (left, right): No damage
Wail (left · right): no damage
Cabin roof: not installed
[After maintenance test results] ※ only confirmation item only
Top Link [46. Adjustment Length]
Check chain [47. Length adjustment] fixed (right), fixing (left)
[Vertical confirmation item other than inspection item]
[After maintenance test results] All items
The following is the entire item of inspection results of this machine.
▼ Body
Engine oil [1.%] 2/3 or more
Engine oil [2. Not dirt] None (tolerance)
England Bolt [3. Oil] None
Engine Oil Filter [4. Oil] None
Radiator [5. Exterior part deformation] Almost no scratch
Radiator [6.] Normal [Note 1]
Radiator [7. Color] Normal
Radiator [8. Water leak]
Reserve tank [9. Water leak]
Reserve Tank [10. Damage]
Reserve tank [11.] Appropriate amount [Note 1]
Fan belt [12. Yurumi] normal
Fan belt [13. Crack] None
Fan belt [14. Wear] None
Air Conditioner Belt [15. Yurumi]
Air Conditioner Belt [16. Crack] Non-loaded
Air Conditioner Belt [17. Wear] Non-loaded
Engine fans [18. Gata and deformation]
Fuel filter [19. Dirty] None
Fuel filter [20. Cock fixing]
Fuel filter [21. Fuel leak]
Air Cleaner Element [22. Dirt] None
Air Cleaner Element [23. Damage] None
Battery [24. Body Expansion] No expansion
Battery [25. Liquid amount] Appropriate amount [Note 2]
Engine club fuel hose [26. Fuel leak]
Front wheel tire [27. Wear] Good * New [Note 3]
Front wheel tire [28. Cracking] almost no [Note 3]
Posterior wheel tire [29. Wear] Good [Note 3]
Rear wheel tire [30. Cracked] almost no [Note 3]
Bear shaft (vertical) [31. Oil leakage]
Building (horizontal) [32. oil leakage]
Advantages of the front axle oil [33.] appropriate amount
Mission oil [34.] Immorting
Back axis [35. Oil leakage]
Crawler [36. Hibi cracks (crawler cracks)] Non-loaded [Note 3]
Crawler [37. Hibi crack (core part)] Non-loaded [Note 3]
Drive sprocket [38. Wear] Non-loaded [Note 3]
Drive sprocket [39. Oil leak] Non-loaded [Note 3]
Roller (roller) [40. fixed] Non-loaded [Note 4]
PTO Axis [41. Oil Leakage]
Universal joint [42. Operation] normal [Note 5]
Universal Joint [43. Cover] No damage
Power St. Cylinder [44. Oil Leak]
Horizontal cylinder [45. Oil leak]
Top Link [46. Adjustment Length]
Check chain [47. Length adjustment] fixed (right), fixing (left)
In-panel lamp [48. On / Operation] Normal [Note 6]
Light (low) [49. On] normal
Light (high) [50. On] normal
Brake lamp [51. Lighting] Non-loaded
Backlight [52. Lighting] Non-loaded
Winker (previous) [53. Blinking] normal
Winker (after) [54. Blink] normal
Horn [55. Sound] Normal
Engine start [56. Operation] [Note 7]
Exhaust [57. Smoke] normal
Clutch [58. Operation] Normal [Note 8]
Brake [59. Play] normal
Brake [60. Effective] normal
Power Stone [61. Operation] Normal
Advanced and reverse [62. Operation] normal
Each shift switching (gear) [63. Operation] normal
Each shift switching (Automa) [64. Operation] Normal
PTO Operation [65. Operation] Normal
Rotary lifting [66. Operation] normal
Rotary Natural Return [67. Operation] None [Note 9]
Conval flow rate adjustment [68. Operation] normal
Two-four-driveration [69. Operation] normal
Automatic cultivation depth [70. Operation] normal
Automatic horizontal control [71. Operation] normal
Double speed turn [72. Operation] normal
Auto Brake Turn [73. Operation] Non-loaded
Pompalab (one-touch lift) [74. Operation] normal
Backup [75. Operation] Normal
Turning up [76. Operation] normal
Radio [77. Operation] Non-loaded
Air conditioner [78. Cooling] Non-loaded [Note 10]
Air conditioner [79. Change in air volume] Non-load [Note 11]
Washer tank [80. Damage] Non-loaded [Note 1]
Wiper (previous) [81. Operation] not installed
Wiper (previous) [82. Rubber wear] not installed
Wiper (front) [83. Washer fluid] not installed
Wiper (later) [84. Operation] Non-loaded
Wiper (after) [85. Rubber wear] Non-loaded
Wiper (later) [86. Washer fluid] not installed
Work light [87. Previous] not installed
Work light [88.] not installed
Indoor light [89. On] not installed
Cigarette socket [90. Operated]
Door damper [91. Operation] not installed
Side glass damper [92. Operation]
Rear glass damper [93. Operation] Non-loaded
Window glass [94. Damage] Non-loaded
Door Mall [95. Damage] Non-loaded
Antenna [96. Damaged] Non-loaded
Chain Case Oil [97.] Normal
Chain case oil [98. color] normal
Chain case oil [99. Oil leak]
Gear case oil [100.] normal
Gear case oil [101. Color] normal
Gear case oil [102. Oil leak]
Nail [103. Wear] Good [Note 3]
Nail [104. Stockless / Damage]
Nail shaft [105. Gata]
Nail shaft [106. Damage]
Protector [107. Wear hole]
Note 1: If replenishment can be performed, it will be shipped.
Note 2: Shield type and confirmation type are all considered to be normal.
Note 3: Please be sure to check wear and consumption with photos.
Note 4: Bearing's Gata, Oil Bus Type Oil, etc. do not confirm.
Note 5: If the joint expansion and contraction operation at the top and bottom of the rotary and the normal rotation operation at the time of PTO rotation are performed "normal". ※ It ships without performing inspection of Gata such as cross bearing.
Note 6: Confirming only the lighting of the tachometer, fuel gauge, water temperature, horizontal, depth, four-driven, double speed, AD, etc. In addition, everything is to be confirmed as much as possible for functions with different lighting conditions for each model. But there may be a millionaire. In that case, please accept it.
Note 7: If it is hard to take or something, it will be described in the state
Note 8: We will ship as "normal" that the clutch is turned off when advanced and reverse, and we will not judge worn.
Note 9: Valve opening / engine OFF · If it does not drop 5 cm or more within 1 minute at the highest increase position, it is judged as "normal".
Note 10: It is determined that the air condition is less than 10 ° C at the blowing mouth temperature.
Note 11: There is an error because the inspector holds the air volume changes to the air volume change