Kubota EP8D (6873)

[Capital information]
Manufacturer: Kubota
Model: EP8D
Planted Article Article 8 (Text planting)
Planting method: Rotary
Art: 30 cm Specifications
Number of plants: 80, 70, 60, 50, 45, 37
Planted stocks: 14 · 16 · 18 · 21 · 24 · 30
Engine type: diesel
Hour: 428 (H)
※ As there are movements in the warehouse, etc., please acknowledge some errors.

Status: Steady state:
Management base: Narita City, Chiba Prefecture Tern
Management number: 2069

[Equipment without]
Horizontal Automatic: Yes
Makoukko (Rotor): Yes
Granular fertilizer: Yes
Paste fertilizer: None
Herbicide spray machine: Yes
Pharmaceutical (bactericidal agent) spreader: None
Auxiliary wheel (inner): None
Auxiliary wheels (outside): Yes
Auxiliary seedling seedlings: Yes
Seedlings Slider: None
Direct sowing part: None
Other equipment:

○ Engine start-up
○ Operation confirmation ※ Continuous use in actual work is not performed.
○ There is no accessories
〇 We are careful about inspection etc., but it will be handed over at the present situation. As you can see about the degree of damage, please consider inspection results and photos carefully. .

[Exterior part inspection]
Model nameplate seal failure
No type seal
Bonnet breakage
Sheet damage
Deck (foot moving part) No damage
Seedlings and no lose loss
Front wheel wheel cover (right) No breakage
Front wheel cover cover (left) No breakage
Equipment version (float) no damage

[Results result] ※ Only defective item
Engine Oil Filter [4. Oil]
Air Cleaner Element [22. Dirty]
Air Cleaner Element [23. Damage] Yes ※ Leep lack
Battery [24. Body expansion] Expandable [Note 2]
Battery [25. Liquid volume] Dosage ※ Shield type [Note 2]
Engine club fuel hose [26. Fuel leak] ※ near the injection nozzle
Front wheel tire [27. Wear] Normal [Note 3]
Rear wheel tire [29. Wear] Normal [Note 3]
Lift cylinder [34. Oil leakage] ※ bleed
Push Rod [37. Damaged (Stock)] None ※ Gris leak ※ Rust

▼ Direct sowing part [Note 11]
Hopper [69. Damage] Non-loaded
Hopper part lid [70. Damage] Non-loaded
Verification of delivery operation [71. Operation]

▼ Fertilization part (granular) [Note 11]
Hopper [72. Damage]
Hopper part lid [73. Damage]
Hopper part Rubber cover [74.] Yes ※ Right: peeling
Fertilizer hose [75. Damage]
Conditioning lever [76. Operation] normal
Blois motor [77. Operation] normal
Fertilization operation confirmation [78. Operation] normal ※ Remaining amount sensor OK

▼ Fertilization part (paste) [Note 11]
Tank [79. Damage] Non-loaded
Tank club lid [80. Damaged] not installed
Fertilizer hose [81. Damage] Non-loaded
Conditioning lever [82. Operation] not installed
Fertilization operation confirmation [83. Operation]

▼ Herbicide sprayer [Note 11]
Tank [84. Damage] None
Tank club lid [85. damage]
Scatter operation confirmation [86. Operation] normal ※ Remaining amount sensor OK

▼ Drug spreader [Note 11]
Tank [87. Damaged] Non-loaded
Tank club lid [88. corrupted] Non-loaded
Scatter operation confirmation [89. Operation]

▼ Problems other than inspection items, missing, other
※ Fertilization (No. 3) behind fixed lever × 1 breakage + roll case replacement is required

[Results] All items
The following is the entire item of inspection results of this machine.
▼ Body
Engine oil [1.%] 2/3 or more
Engine oil [2. Not dirt] None (tolerance)
England Bolt [3. Oil] None
Engine Oil Filter [4. Oil]
Radiator [5. Exterior part deformation] Almost no scratch
Radiator [6.] Normal [Note 1]
Radiator [7. Color] Normal
Radiator [8. Water leak]
Reserve tank [9. Water leak]
Reserve Tank [10. Damage]
Reserve tank [11.] Appropriate amount [Note 1]
Water pump (alternator) belt [12. Yurumi] normal
Water pump (alternator) belt [13. Crack]
Hydraulic belt [14. Yurumi] normal
Hydraulic belt [15. Crack] None
Hydraulic belt [16. Wear] None
Traveling belt [17. Yurumi] not installed
Traveling belt [18. Crack] Non-loaded
Traveling belt [19. Wear] not installed
Engine fan [20. Gata / deformation] None
Fuel filter [21. Fuel leak]
Air Cleaner Element [22. Dirty]
Air Cleaner Element [23. Damage] Yes ※ Leep lack
Battery [24. Body expansion] Expandable [Note 2]
Battery [25. Liquid volume] Dosage ※ Shield type [Note 2]
Engine club fuel hose [26. Fuel leak] ※ near the injection nozzle
Front wheel tire [27. Wear] Normal [Note 3]
Front wheel tire [28. Cracking] almost no [Note 3]
Rear wheel tire [29. Wear] Normal [Note 3]
Rear wheel tire [30. Cracked] almost no [Note 3]
Bear shaft (vertical) [31. Oil leakage]
Building (horizontal) [32. oil leakage]
Back axis [33. Oil leak]
Lift cylinder [34. Oil leakage] ※ bleed
Planting nail [35. Damage (shortage)] None
Planting nail [36. Deformation]
Push Rod [37. Damaged (Stock)] None ※ Gris leak ※ Rust
Push Rod [38. Deformation] None
Makoukko (ロ ロ) [39. Damage (not missing)]
Light [40. On] normal
Winker (previous) [41. Blinking]
Winker (later) [42. Blink] normal
Horn [43. Sound] Normal
Engine start [44. Operation] It takes [Note 4]
Exhaust [45. Smoke] normal
Brake [46. Operation] Normal
Advanced and reverse (driving) [47. Operation] normal
Swirling [48. Operation (right)] Normal
Swirling [49. Operation (left)] Normal
Power Stone [50. Operation] Normal
Sub-transmission switching [51. Operation] normal
Sercunes (stock) switching [52. Operation] normal
Seedling ride upper and lower [53. Rising / fall] normal
Seedling Road Natural descent [54. Operation] None [Note 5]
Marker [55. Operation] Normal
Planting depth switching lever [56. Operation] normal
Seedling volume adjustment lever [57. Smoke] normal
Hydraulic sensing control [58. Operation] normal [Note 6]
Automatic horizontal control [59. Operation] normal
Pompalever [60. Operation] Normal
Backup [61. Operation] Normal
Transfer behavior [62. Operation] normal [Note 7]
Vertical feed operation [63. Operation] normal [Note 8]
Explanching operation (rotary, crank case) [64. Operation] normal [Note 9]
Nail operation (planar arm) [65. Operation] normal [Note 10]
Condition clutch [66. Operation] normal
Makoukko (Equipment Rotor) [67. Operation] Normal
Seedlings Alarm [68. Operation] Normal

▼ Direct sowing department
Hopper [69. Damage] Non-loaded
Hopper part lid [70. Damage] Non-loaded
Verification of delivery operation [71. Operation]

▼ Fertilization part (granular)
Hopper [72. Damage]
Hopper part lid [73. Damage]
Hopper part Rubber cover [74.] Yes ※ Right: peeling
Fertilizer hose [75. Damage]
Conditioning lever [76. Operation] normal
Blois motor [77. Operation] normal
Fertilization operation confirmation [78. Operation] normal ※ Remaining amount sensor OK

▼ Fertilization part (paste)
Tank [79. Damage] Non-loaded
Tank club lid [80. Damaged] not installed
Fertilizer hose [81. Damage] Non-loaded
Conditioning lever [82. Operation] not installed
Fertilization operation confirmation [83. Operation]

▼ Herbicide sprayer
Tank [84. Damage] None
Tank club lid [85. damage]
Scatter operation confirmation [86. Operation] normal ※ Remaining amount sensor OK

▼ Medical spreader
Tank [87. Damaged] Non-loaded
Tank club lid [88. corrupted] Non-loaded
Scatter operation confirmation [89. Operation]

▼ Problems other than inspection items, missing, other
※ Fertilization (No. 3) behind fixed lever × 1 breakage + roll case replacement is required

Note 1: If replenishment can be performed, it will be shipped.
Note 2: Shield type and confirmation type are all considered to be normal.
Note 3: Please be sure to check wear and consumption with photos.
Note 4: If it is difficult to take or something, it will be described in the state.
Note 5: Seedlings and Hydraulic Retain Lever, Hydraulic Return Lever, "Fixed", and recognize that it does not drop naturally if it is not 10 cm or more within 1 minute in the engine stop state.
Note 6: While the hydraulic sensing function is "reacted", it does not confirm until "sensitivity".
Note 7: Example: Verify that you want to operate twice twice at the time of 20 horizontal feeds (seedlings are not actually used).
Note 8: Verify that the seedling feed belt is operating. Do not check the detailed part such as what CM sent, all the above-mentioned equivalent.
Note 9: Planting unit Check the operation of the rotary (crank) case.
Note 10: Check the operation of the push rod.
Note 11: Only the operation confirmation of the tanes / fertilizer / herbicide / bactericide is not performed. Because it is not inspected, confirmation of the remaining amount sensor, the supply amount adjustment dial, the amount of delivery, etc. is not examined. Please check the customer at the time of actual work ..