Yanmar AJ318 (6455)

"New Year holiday notice

We will leave the following schedule for the New Year holidays.
We apologize for any inconvenience, but thank you for your consideration.

New Year holidays: From December 29, 202 (Wed) to January 5, 2022 (Wed)

※ We will respond sequentially from January 6 (Thursday) January 6, 202, 2022 for inquiries during the closing period.

[Capital information]
▼ Body
Manufacturer: Yanmar
Model: AJ318
Number of harvestors: 3
Horce: 18 (PS)
Hour: 322 (H)
※ As there are movements in the warehouse, etc., please acknowledge some errors.

Crawler width 330 (mm)

▼ Status / Storage Location
Status: Steady state:
Management base: Hyogo Prefecture Kishinetsu City 1 yard
Management number: 1840

[Equipment without]
No cabin
No canopy (hood)
No knot
Auxiliary Devida (OK, Swiss, etc.)
Automatic horizontal control (left and right)
Automatic horizontal control (front and rear)

[Please confirm the following]
○ Engine start-up
○ Operation confirmation ※ Continuous use in actual work is not performed.
○ There is no accessories
○ We are careful about inspection etc., but it will be handed over at the present situation. Please consider the following and look at the result of inspection.

[Exterior part inspection]
Type nameplate seal damaged almost no
Model seal (left, right) Corruption almost no
Sheet damage
Devider tip-breaking almost no
Devider Side Cover Corrupt
Tank part concave damage
Threshing cover part breakage
Cutter cover (rear) part breakage
Side mirror (left / right) No damage
Non-cabin roof

【Example of inspection】 ※ Only confirmation item only

Air Cleaner Element [9. Dirty]
Drive sprocket [26 oil leak (right)]
Crawler [28 large cracks (right) (looking from outside)]
Crawler [29 large cracks (left) (looking from outside)]
Header transfer (nail) [77 operation]

【Remarks】

[Results] All items
The following is the entire item of inspection results of this machine.
Engine oil [1.%] or higher
Engine oil [2. Not dirt] None (tolerance)
Radiator [3. Amount] Normal
Radiator [4. Color] normal
Radiator [5. Water leak]
Reserve Tank [6. Damage / Stockless] None
Fanbert [7. Stockless] None
Air Conditioner Belt [8. Stock] Non-loaded
Air Cleaner Element [9. Dirty]
Air Cleaner Element [10 Damage / Stockless] None
Engine start [11 operation]
Battery [12 operation] Almost normal
Exhaust [13 smoke] normal
Mowring up [14 rising / falling]
Advanced / reverse (driving) [15 operation]
Advance and reverse (work) [16 operation]
Advanced and reverse (falling) [17 operation] not installed
Normally pivot [18 operation (right)]
Normal turn [19 operation (left)]
Brake pivot [20 operation (right)]
Brake pivot [21 operation (left)]
Spin turn [22 operation (right)] not installed
Spin turn [23 operation (left)] not installed
Cive turning [24 operation (right)]
Deurization [25 operation (left)]
Drive sprocket [26 oil leak (right)]
Drive sprocket [27 oil leak (left)] no
Crawler [28 large cracks (right) (looking from outside)]
Crawler [29 large cracks (left) (looking from outside)]
Brox (upper) [30 fixing (right)]
Ring (upper) [31 sticking (left)] None
Ring (bottom) [32 fixing (right)]
Ring (bottom) [33 sticking (left)] None
Movable roller [34 fixing (right)]
Movable roller [35 fixing (left)]
None None [36 shortages / defect]
No blade [37 shortages, defect]
こ 回 回 回 3 動 作 る
Feed chain [39 operation]
Toumi [40 operation]
Swing flow board [41 operation]
Waraka Chain [42 Operation]
Waratain (nail) [43 shortages and defect]
Waratain (nail) [44 operation]
Cutter blade (cutting) [45 shortages / defect]
Cutter blade (feed) [46 shortages / deficiency]
Cutter Blade (Cutting) [47 Operation]
Cutter blade (feed) [48 operation]
No. 49 [49]
2nd Lacen (horizontal) [50 operation]
No. 1 Lacen (Vertical) [51 Operation]
2nd Lacen (vertical) [52 operation]
Oruger Release Operation (Manual) [53 Lift]
Oruger Runction (Manual) [54 Right Turning]
Auger Release Operation (Manual) [55 Left Pivot]
Oruger teeth operation (manual) [56 down]
Authority operation (automatic) [57 automatic turning (right)] not installed
Authorion operation (automatic) [58 automatic swivel (left)] not installed
Oruger Runction (Automatic) [59 Automatic Swivel (After)] Non-loaded
Orhalonation operation (automatic) [60 automatic storage]
Auger OP (zoom swing shutter etc.) [61 operation] not installed
Emission racemic operation [62 operation]
None
Mowet [64 operation]
Caused nails [65 shortages / deficit]
Cause nails [66]
Auxiliary Divider Nail [67 Stock Loss] None
Auxiliary Device Nail [68 Operation]
Belt with protrusion [69 missing / deficit]
Belt with protrusion [70 operation]
Star Wheel [71 missing / deficit]
Star Wheel [72]
Corporate Corporation [73 Operation]
Kakikami (nail) [74 shortages, defect]
Kakikami (nail) [75 operation]
Header transfer (nail) [76 shortages / deficit] not installed
Header transfer (nail) [77 operation]
Big depth chain [78 operation]
Koi depth (manual) [79 operation]
こ (automatic) [80 lamp lighting]
When cutting and shift switching (standard) [81 operation]
When cutting and shift switching (high speed) [82 operation] not installed
When cutting and shift switching (low speed) [83 operation]
Left and right horizontal control (manual) [84 operation] not installed
Left and right horizontal control (automatic) [85 operation] non-loaded
Before and forth horizontal control (manual) [86 operation] not installed
Horizontal control (automatic) [87 lamp lighting] not installed
Sorting Automatic Lamp [88 Lights] Non-loaded
Auto Clutch Lamp [89 Lights] Non-loaded
Automatic lubricating switch [90 reaction] not mounted
Emergency stop switch [91 operation]
Radio [92]
Panel operation (confirmation of rotation only) [93 operation]
Light [94 lighting (right)]
Light [95 lit (left)] not installed
Winker (previous) [96 flashing (right)]
Winker (previous) [97 flashing (left)]
Winker (later) [98 flashing (right)] not installed
Winker (later) [99 flashing (left)] Non-loaded
Horn [100 sounds]
Air conditioner [101 cooling] not installed
Air conditioner [102 air volume change] not installed
Work etc. [103]

【Notes】
· We do not check other than inspection items, please check with photos etc.
· Belt-related wear condition is not checked.
· Wear of Racen is not checked.
· We do not check chain and consumables.
· We do not check wear of the rolling rolling roll.
· The crawler check is simple, but it is not checked to the detailed part.
· Horizontal automatic checks the lighting of the lamp, etc., but it is not checked until operation.
· Automatic depth Automatic automatically checks the lighting of the lamp, but it does not check until operation.